设为首页 - 加入收藏
您的当前位置:首页 >Caddock Electronics, Inc. >IMS-5-33-5%_Vishay / Dale_Fixed Inductors 正文

IMS-5-33-5%_Vishay / Dale_Fixed Inductors

来源:LM317 Electronics Components编辑:Caddock Electronics, Inc.时间:2021-06-15 15:24:29

Emulex claims its LightPulse 16Gbit adapters will deliver more than one million I/Os per second on any one of its four ports. In anticipation of the shift, the card's ports can each support 10G Ethernet or be aggregated into a 40G Ethernet link.

Fujitsu chooses Cadence DFM for 28-nm

Oracle rolls T4 servers, pulls in 28nm T5

IMS-5-33-5%_Vishay / Dale_Fixed Inductors

Molex Inc.  launched the Impact 100-Ohm orthogonal direct connector system designed for a direct connection of printed circuit boards using the same daughtercard. 

Featuring options of 3-through 6-pair , the Impact orthogonal direct technology supports high-speed 25 Gbps data rates and substantially eliminates airflow, cross-talk, and capacitance constraints in high-speed channels which are introduced through current backplane/midplane laminates.

IMS-5-33-5%_Vishay / Dale_Fixed Inductors

According to Molex, the combination of the direct right-angle male connector and daughtercard simplifies component management and boosts performance in data, telecommunications, medical, networking and other high-speed devices.

Molex Impact orthogonal direct connectors feature two compliant-pin attach options and 18 to 72 differential pairs per orthogonal node.  The 3-through 6-pair configurations include a complete range of options for the PCB and mating interface.  The system leverages the Impact mating interface, which offers the lowest mating force in the backplane industry, and patented compliant-pin technology to provide design flexibility and balance for high mechanical and electrical performance.

IMS-5-33-5%_Vishay / Dale_Fixed Inductors

Designed to meet IEEE 10GBASE-KR and Optical Internetworking Forum (OIF) Stat Eye Compliant channel performance requirements, the Molex Impact orthogonal direct connector system ensures end-to-end compliance.  Featuring shorter line cards and switch-module signal paths, the simple 2.15 by 1.35mm grid on both the Impact backplane and daughtercard reduces PCB routing complexity and costs.

Datasheet: Click here.

Ian Drew, executive vice president of strategy, ARM

Lance Howarth, executive vice president of marketing at ARM

Microsemi Corp. has strengthened its portfolio of radiation-hardened products with what it claims is the industry's first family of 120 volt, 50 watt high-reliability single, dual and triple output rad-hard DC-DC converters.

    1    2  3  4  5  6  7  8  9  10  11  
上一篇:resettable fuses
下一篇:ADSST-ENC-2015
热门文章

    0.1599s , 9931.2578125 kb

    Copyright © 2016 Powered by IMS-5-33-5%_Vishay / Dale_Fixed Inductors,LM317 Electronics Components  

    sitemap

    Top